Roto-Mix 1355 HDS, Руководство по эксплуатации и запасным частям

Страница: 27 / 69

Page 27
LUBRICATION CHART
ALWAYS DISCONNECT OR DISENGAGE POWER TAKE OFF AND
REMOVE KEYS FROM TRACTOR BEFORE ADJUSTING, LUBRICATION OR
SERVICING THIS MACHINE. FAILURE TO HEED MAY RESULT IN SERIOUS
PERSONAL INJURY OR DEATH.
ITEM LUBRICATION INTERVAL
Conveyor Chain Light Weight Oil Brush or spray on lightly every 40 hours of
operation.
Conveyor Bearings Good Quality Grease One pump every 8 hours of operation.
PTO (Slip Shaft) Good Quality Grease Every 8 hours
IMPORTANT: At each lubrication make
sure the slip shaft slides in and out freely,
failure of the shaft to slide freely will result
in drive train damage.
Wheel Bearings 90w Gear Lube Inspect daily for leaks.
U-Joint Good Quality Grease Every 8 hours
CV-Joint Good Quality Grease Every 8 hours
Hydrostat System
CITGO Transgard
Tractor Hydraulic
Fluid - Material Code
633310001
Only when the system has been
contaminated.
Speed Increaser
Gearbox Mobil Delvac
Synthetic Gear Oil
75W-90 After the first 500 hours of operation, then
2000 hours or every 12 months, whichever
comes first.
Oil Filters 1. 24 hours after start up of the system.
2. Normal maintenance every 500 hours
of service.