Roto-Mix 1355 HDS Скачать руководство пользователя страница 13

Страница: 13 / 69

Page 13

SAFETY DECAL CARE

Keep safety decals and signs clean and legible at all times.

Replace safety decals and signs that are missing or have become illegible.

Replaced parts that displayed a safety sign should also display the current sign.

Safety decals or signs are available from your dealer or the ROTO-MIX manufacturing
plant.

How to Install Safety Decals:

Be sure that the installation area is clean and dry.

Decide on the exact position before you remove the backing paper of the decal.

Remove the smallest portion of the split backing paper.

Align the decal over the specified area and carefully press the small portion with the
exposed sticky backing in place.

Slowly peel back the remaining paper and carefully smooth the remaining portion of the
decal in place.

Small air pockets can be pierced with a pin and smoothed out using the piece of decal
backing paper.

SAFETY

READ BEFORE

YOU FEED

PRACTICE FIRE PREVENTION

Keep fire extinguishers accessible at all times. Use the extinguisher recommended for the material
being processed. It should be rated safe for use on electrical fires.

Never smoke close to combustible material.

Clean the area before welding or other activities which may make sparks.

Keep all components that generate excessive heat clear of oil and other combustible materials.

Содержание 1355 HDS






































































Результаты поиска

Содержание 1355 HDS

Отзывы:

Бренды по названию

Популярные бренды

Roto-Mix 1355 HDS, Руководство по эксплуатации и запасным частям

Результаты поиска

Содержание 1355 HDS

Отзывы:

Бренды по названию

Популярные бренды