Roto-Mix 1220-20, Инструкция по безопасности и эксплуатации

Страница: 23 / 65

324011
336032
344168
344083
1220-20 STATIONARY
#351921 O-ring is located between the overhung load
adapter and the Auburn gearbox on stationary units.
#351921 O-ring is located between the
hydraulic motor and the Auburn gearbox
on truck units.
1220-20 TRUCK
344168
360101
The Auburn Gear Box to the left, #344168, is used on the top auger
Truck and Stationary drive, it takes 122 oz of (Mobil Delvac Synthetic
Gear Oil 75W-90) to the full level.
The Auburn Gear Box to the left #3441170, is used on the oil bath
drive of a Stationary unit, it takes 170 oz of (Mobil Delvac Synthetic
Gear Oil 75W-90) to the full level.
The Auburn Gear Box to the left, #3441171, is used on the oil bath
drive of a Truck unit, it takes 175 oz of (Mobil Delvac Synthetic Gear
Oil 75W-90) to the full level.
SERVICING THE TOP AUGER DRIVE
Note for Service:
When seperating the hydraulic motor or the overhung load adapter from the Auburn gearbox the oil in
the gearbox will drain between the two components down to just below the half way point of the gearbox.
To minimize an oil spill,the oil can be drained from the gearbox to a level just below the half way point.
When reinstalling the hydraulic motor or overhung load adapter to the Auburn gearbox, refill the gearbox
to the half way point check plug with (Mobil Delvac Synthetic Gear Oil 75W-90) . If the Auburn gearbox
is drained completely it will take approximately 122 ounces to fill it again.
PLANETARY GEARBOX OIL CAPACITY
23