Roto-Mix 1220-20, Инструкция по безопасности и эксплуатации

Страница: 21 / 65

21
LUBRICATION
DISENGAGE PTO & SHUT OFF POWER BEFORE LUBRICATING THE MACHINE.
LOOSE OR FLOPPY CLOTHING SHOULD NOT BE WORN BY THE OPERATOR.
OIL BATH:
Fill the oil bath with 30 weight motor oil to sight plug level.
GREASE BANK:
Grease every 10 hours.
FRONT END BEARINGS:
Grease every 10 hours.
PTO SHAFTS & U-JOINTS:
Grease every 10 to 20 hours.
HYDRAULIC PUMP DRIVE:
Grease every 10 to 20 hours.
MIXER DOOR CYLINDER HYDRAULICS (TRUCK):
Replace hydraulic filter after first 100
hours of operation then every 500 hours of operation with 10 micron element. Replace
fluid every 2000 hours of operation or every year, which ever occurs first, with
approximately 1 gallon (3.7 liters) of
(CITGO Transgard Tractor Hydraulic Fluid -
Material Code 633310001) .
OPERATION:
Drain rain water out of mixer before use.
1” of rain in a 1220-20 equals (124 gal) 1,034
lbs. of water which will increase the moisture in 1000 lbs. of dry hay (@ 12%) to 57%
moisture or 500 lbs. of dry hay (@ 12%) to 71% moisture.
ROTO-MIX will not warranty bent or broken rotors, bent or broken augers caused from
misuse, wet hay, foreign objects, and/or overloading.
CAUTION: Do not engage the rotor without first starting the augers.
CAUTION: When turning on the rotor, idle the truck down to 1000 RPM or less.