Rothenbuhler Engineering REMOTE FIRING DEVICE, Руководство оператора

Страница: 46 / 50

RFD OPERATOR MANUAL
7-37
7. BASIC TROUBLESHOOTING IN THE FIELD.
7.1. DETONATOR UNITS.
7.1.1. “ON” and “SAFE” lights do not illuminate when the Antenna Assembly is
installed.
a) Check Antenna Assembly and make sure it is seated, “clicks” on to the connector.
b) Recharge the battery.
c) Try a different Antenna Assembly.
7.2. CONTROLLER UNIT.
7.2.1. “ON” Light does not stay on.
a) Check Antenna Assembly and make sure it is seated, “clicks” on to the connector.
b) Press and hold the “ON” switch for 5 seconds.
c) Controller Unit battery needs to be recharged.
7.2.2. Command receipt is not confirmed by Detonator Unit.
a) Detonator Unit is more than 1,000 feet from Controller Unit.
b) If the Detonator Unit is less than 1,000 feet away from the Controller Unit.
Check for damage to Controller Unit Antenna Assembly.
Try a different Antenna Assembly on the Controller Unit.
Move at least 25 feet in any direction and try again.
Reposition the Detonator Unit if:
• The antenna is not positioned vertically.
• The antenna is next to another radio antenna.
•
The antenna is surrounded by metallic objects.
• Use optional magnetic mount antenna for improved gain.
c) Check carrier detect light to see if there is interference from another source.