15
FUNCTION OF THE SAFETY DEVICES
Allow the appliance to cool down completely, close the gas valve and
disconnect the machine from the mains and gas supply before cleaning,
maintenance or storage.
When the appliance is too hot, it will automatilally turn itself off. Before trying to use the
appliance again, locate and remove the cause of the overheating.
If the flame extinguishes during use, the gas supply is automatically cut off. Normally, this
only happens in starting the appliance as it is still cold. Repeat the ignition procedure and
keep the gas feed button pressed for a longer time.
CHANGING THE GAS CYLINDER
OVERHEAT PROTECTION
SAFETY CUT-OUT
- The gas cylinder may be changed only in the open, well away from sources of ignition and
other persons.
- Shut the cylinder valve, switch it off and disconnect it from the mains.
- If the appliance was in use, ensure that the flame has completely extinguished and let the
appliance cool down completely.
- Unscrew the gas regulator and remove it.
- Proceed as described in the section ‘Connecting to a gas cylinder’.
CLEANING
Clean the machine regularly with a dry cloth. Do not use aggressive cleaning agents, solvents
or petroleum spirit. Do not dip or spray the appliance in / with water or other liquids. The
appliance and mainly its openings should be kept free of dust.
MAINTENANCE, STORAGE AND CLEANING
GB
1500000050,51_Anleitung_alle Sprachen 21.06.2011 11:56 Uhr Seite 15