Roth Cyclo II, Техническая информация, Страница: 3 / 6

gk 02/2006
3
4. Initial operation
Before use, it must be checked whether the available mains voltage corresponds with the voltage given on
the rating plate.
After switching on the voltage supply, the operation control
15 shines.
By turning the speed control 16, the speed can be adjusted from 0 - max .
Turn the direction switch 17 left = anticlockwise rotation, right = clockwise rotation or middle = stop.
5. Tube cartridges and Tubes
5.1 Selection of the correct tube cartridge
Each time a tube is inserted and the tube changed, it must be ensured that the cartridge is designed for the
tube used. Only pump hoses with a wall thickness of 1.6 mm are suitable for use.
Hose ID (mm)/
hose cassette 1.6 / 1.6 (Y375.1) 3.2 / 3.2 (Y376.1) 4.8 / 4.8 (included in delivery)
3-roll head: Pumping
capacity (ml/min) 1.5 - 30 6 - 110 12 - 240
6-roll head: Pumping
capacity (ml/min) 1.2 - 24 4.4 - 88 9.6 - 192
Fig. 3:
Individual parts of the pump head
1 Pressure screw
2 Lock nut
3 Pivot lever
4 Tube cartridge
5 Roller rotor
6 Transport rollers
7 Feed tube
8 Tube clamping
9 Stud bolts
10 Manual nut for dismantling
11 Thrust bearing
12 Drive shaft
13 Driving pin
14 Main body
15 Front plate with bearings