Operations manual AQUASTOP
®
II
20
7
Setting the operational limit values
7.1 Temperature limit value :
To alter the temperature limit value, press once the
„M“-key (3). On the lower line of the display, „te“ is
shown and the temperature limit value shown on the
upper display line can now be altered with the „UP/
DOWN“ keys (2/7). Maintaining the keys pressed
makes increasing or decreasing the value quicker.
The new limit value is automatically accepted after
20 sec. (back to surveillance mode).
Pressing the „M“-key (3) again switches over to the
next menu parameter :
7.2 Flow limit value :
On the upper line of the display, „flo“ is shown and
the flow limit value shown on the lower display line
can now be altered with the „UP/DOWN» keys (2/7).
