4
1. Press the ID button on the top surface of RothDock
for 5 seconds until the led flashes on and off.
2. Then press the ID button on the back of the speaker
until the led flashes.
3. When both units are paired, the lights will remain
on, and you should hear a steady tone through
your speakers. The process should only take a few
seconds.
Connecting the RothDock
Plug in the supplied cable to the matching
3.5mm jack inputs on the back of the speakers.
Erm, that’s it.
Connecting the speakers
You can correct other devices by using the auxiliary
input on the back of the dock and also directly into the
speaker by using the auxiliary input or USB inputs.
•
Music player (MP3, MP4 or mobile phone)
•
CD Player
•
Computer
Connecting other devices
ID Button
iPod/iPhone Connector
LED
Shows when
RothDock input’s
connected
Mute
Volume
Up/Down
Select
CHARLiE 2.0 Manual 23-6-10.indd 4
24/6/10 09:04:02
