5
x
Commissioning, decommissioning
FA ROTEX SC / SCS / HYC - 02/2013
23
Ɣ
Allow the individual heat exchangers to run empty one after
the other based on the suction lifter method.
Drain the solar panel circuit (only pressurised
system)
5.2.2 Final shutdown
Ɣ
ROTEX Sanicube / HybridCube disconnected from all
electrical and water connections.
Ɣ
Dismantle the ROTEX Sanicube / HybridCube in accordance
with the instruction manual (chapter 4 "Set-up and instal-
lation") in reverse order.
Ɣ
ROTEX Sanicube / HybridCube disposed off in a professional
manner.
Recommendations for disposal
CAUTION!
If heat transfer media containing glycol are exposed to
temperatures above 170 °C over an extended period,
they will decompose or form silt. This may reduce the
frost protection, affect the output of the solar system
and damage components of the system.
Ɣ
In the event of extended standstill of the solar
panel circuit drain in accordance with the instal-
lation instructions of the regulating and pump unit.
ROTEX, thanks to the environmentally friendly design
of the Sanicube / HybridCube hot water storage tank,
has established the preconditions to ensure environ-
mentally friendly disposal. Proper disposal in compli-
ance with the respective national regulations of the
country of use is the responsibility of the user/owner.
The designation of the product means that electrical
and electronic products may not be disposed of
together with unsorted domestic waste.
Proper disposal in compliance with the respective
national regulations of the country of use is the respon-
sibility of the user/owner.
Ɣ
Only a qualified technician may disassemble the
system.
Ɣ
Disposal may only be carried out by a facility that
specialises in reuse, recycling and recovery.
Further information is available from the installation
company or the responsible local authorities.
