Rotenso Z26X, Руководство пользователя

Страница: 36 / 38

70 71
User manual User manual
Portable air conditioner - ZICO X Portable air conditioner - ZICO X
EN EN
Remote control Remote control
Current
time 1PM
2:00PM 3:00PM
4PM 5PM 6PM
Timer starts
Unit turns
ON
Unit turns
OFF
2.5 hours later
5 hours later
3:30PM
ON/O
FF
M OD
E
FAN
SHO
R T CUT
TIMER
ON
TIMER
OFF
TEM
P
SLEE
P
ON/O
FF
M OD
E
FAN
SHOR
T
CU
T
TIMER
ON
TIMER
OFF
TEM
P
SLEE
P
TIMER
xn
xn xn
Example: If current timer is
1:00PM, to set the timer as above
steps, the unit will turn on 2.5h
later (3:30PM) and turn off at
6:00PM.
7. HOW TO USE ADVANCED FUNCTIONS
7.1. SWING function
Press Swing button
The louver will swing up and down automatically when pressing Swing
button. Press again to make it stop.
7.2. LED display
Press LED button
LED
5s
LED
Press this button more than 5 seconds (some units)
Press this button to turn on and turn off the display
on the unit. Keep pressing this button more than 5 seconds,
the indoor unit will display the actual room
temperature. Press more than 5 seconds again will
revert back to display the setting temperature.
7.3. SLEEP function
Press SLEEP button to enter the energy efficient mode.
The SLEEP function is used to decrease energy use while you sleep (and don’t
need the same temperature settings to stay comfortable). This function can
only be activated via remote control.
NOTE: The SLEEP function is not available in FAN or DRY mode.
7.4. Silence function
Keep pressing Fan button for more than 2 seconds to activate/disable Silence
function (some units).
Due to low frequency operation of compressor, it may result in insufficient cooling
and heating capacity. Press any button while operating will cancel silence function.
2s
7.5. SHORTCUT function
Swing
Push this button when remote controller is on, the system will automatically
revert back to the previous settings including operating mode, setting
temperature, fan speed level and sleep feature (if activated).
If pushing more than 2 seconds, the system will automatically restore the
current operation settings including operating mode, setting temperature, fan
speed level and sleep feature (if activated ).
7.6. I SENSE (Follow Me function)
The I Sense function enables the remote control to measure the temperature at
its current location and send this signal to the air conditioner every 3 minutes
interval.
When using AUTO, COOL or HEAT (some units) modes, measuring ambient
temperature from the remote control will enable the air conditioner to
optimize the temperature around you and ensure maximum comfort.