66
User manual
Room air conditioner - REVIO X
EN
PART 5. REMOTE CONTROL SUPPORT
7.7. FP function
The unit will operate at high fan speed (while compressor on) with
temperature automatically set to 8°C/46°F.
Note:
This function is for heat pump air conditioner only.
Press this button 2 times during one second under HEAT Mode and setting temperature of 16°C/60°F or
20°C/68°F (for some models) to activate FP function. Press On/Off, Sleep, Mode, Fan and Temp. button while
operating will cancel this function.
7.8. LOCK function
Press together Turbo button and Humidity button at the same
time more than 5 seconds to activate Lock function. All buttons
will not response except pressing these two buttons for two
seconds again to disable locking.
5s
5s
Turbo
+
Humidity
7.9 Turbo Function
When you select Turbo feature in COOL mode, the unit will blow cool air
with strongest wind setting to jump-start the cooling process.
When you select Turbo feature in HEAT mode, for units with Electric heat
elements, the Electric HEATER will activate and jump-start the heating
process.
Turbo
Press TURBO button
7.10. SET function
SET
OK
2