47
User manual
Room air conditioner - REVIO X
EN
PART 2. OPERATING THE DEVICE
4. MANUAL OPERATION OF THE DEVICE
The indoor units have a button to control the device during a remote control failure. You can get to it by
opening the front panel. The button should only be used if a wireless remote control fails or needs service.
Control button
manual
REMEMBER
The manual button is intended for testing purposes and emergency operation only. Please do not
use this function unless the remote control is lost and it is absolutely necessary. To restore regular
operation, use the remote control to activate the unit.
To operate your unit manually:
1. Locate the MANUAL CONTROL button on the right-hand side panel of the unit.
2. Press the MANUAL CONTROL button one time to activate FORCED AUTO mode.
3. Press the MANUAL CONTROL button again to activate FORCED COOLING mode.
4. Press the MANUAL CONTROL button a third time to turn the unit off.
ATTENTION
Unit must be turned off before manual operation! Do not put your fingers in or near the blower and
suction side of the unit. The high-speed fan inside the unit may cause injury.