Rotenso ORTA O26W, Руководство пользователя

Страница: 19 / 32

ORTA W - Portable air conditioner
19 User manual
PART 4. OPERATIONS AND FUNCTIONS
2. AUTO-RESTART(on some models)
If the unit breaks off unexpectedly due to the power cut,it will restart with the previous function setting automatically
when the power resumes.
3. WAIT 3 MINUTES BEFORE RESUMING OPERATION
After the unit has stopped, it can not be restarted operation in the first 3 minutes. This is to protect the unit.
Operation will automatically start after 3 minutes.
4. AIR FLOW DIRECTION ADJUSTMENT
The louver can be adjusted automatically. Adjust the air flow direction automatically:
• When the Power is ON, the louver opens fully.
• Press the SWING button on the panel or remote controller to initiate the Auto swing feature. The louver willl
swing up and down automatically.
• Please do not adjust the louver manually.
5. POWER MANAGEMENT feature(optional)
When the ambient temperature is lower than the setting temperature for a period of time, the unit will be
automatically operate power management feature. The compressor will stop, then the fan motor for some models
may stop. When the ambient temperature is higher than the setting temperature, the unit will be automatically
quit the power management feature. The compressor and fan motor run.
4. WATER DRAINAGE
• During dehumidifying modes, remove the upper drain plug from the back of the unit, install the drain
connector(5/8" universal female mender) with 3/4" hose (locally purchased). For the models without drain
connector, just attach the drain hose to the hole. Place the open end of the hose directly over the drain area in
your basement floor.
NOTE
During cooling mode, please reinstall the upper drain plug to the unit securely to reach the maximum
performance and avoid leakage.
• If you can set the humidity level (portable
with humidity sensor), please put the
back duct for best dehumidification effect,
but the back duct doesn’t need to connect
to window. If you can’t set the humidity
level (portable without humidity sensor),
please don’t put the back duct.
Press the power cord
buckle into the rear
cover.
Fig. 16
Remove the upper
drain plug
Continuous
drain hoses