Rotech ANSI LTR, Инструкция по установке, эксплуатации и обслуживанию

Страница: 49 / 52

45
Fig. B
3. After placing the coupling guard half (pump end) around the pump end plate, secure it with a bolt, nut and two (2)
washers through the round hole in the front end of the guard half as shown in Figure C. Tighten securely.
Fig. C
4. Slightly spread the bottom of the coupling guard half (driver end) and place it over the coupling guard half (pump end) so
that the annular groove in the coupling guard half (driver end) faces the motor as shown in Figure D.
Gaurd Half
End Plate