Rotax 125 MAX DD2 evo, Инструкция по установке и руководство оператора

Страница: 88 / 120

BRP-Rotax
Operators Manual
Figure 3.5
______________________________________________________
MANUAL SET-UP
Step Procedure
1 In case no GPS signal or internet connection is available, the necessary da-
ta needs to be added manually, which of course requires knowledge about
current weather conditions at the race track as well as the altitude. By click-
ing on the empty space next to “Temperature”, “Altitude”, “Atmos. Pressure”
and “Humidity”, you are able to enter the required information. In terms of
“Atmos. Pressure”, the atmospheric pressure at sea level has to be entered,
usually the barometer shows the actual level.
2 As a second step, the engine type of the kart needs to be selected. There-
fore, the button underneath the weather data needs to be clicked. The app
will automatically show all potential Max evo engines, from which one can
be selected by clicking on a certain engine type.
3 After all the necessary information has been provided and selected, you on-
ly need to click the circular red button saying “CALCULATE” at the bottom
of the screen.
4 Now the recommended main jet value will be provided. In case a second
calculation needs to be made, you can start over by simply pressing the
button saying “RESET” next to the calculated value.
Effectivity: 125 MAX DD2 evo 3
Page 7
Edition: September 01 2019