Rotary SGL35, Руководство по эксплуатации и техническому обслуживанию

Страница: 26 / 53

10. Transport , storage
22
117592 ● 03/2013

Do not loiter close to or under suspended
loads.

Always unload the packing unit with a forklift
truck or a pallet jack with sufficient load
capacity and transport it to the storage point.

Always use hoisting equipment (straps,
chains, etc.) approved for the total weight.

Attach them so that the load cannot slip
(check the centre of gravity of the load).

Always fasten individual components to load-
bearing parts. Only lift vertically, steadily, and
without jolting.

Carry out a visual inspection before unloading.

Secure loose parts.

When raising or lowering, always monitor the
danger zones.

Always transport hydraulic components
without oil.

Protect controls and hydraulic units against
adverse weather conditions and avoid sudden
fluctuations in temperature
10.3 Unpacking

Unpack the lift with the forwarder still present.

After removing the packaging, carry out a visual
inspection to ensure that the various components
of the lift are OK
(arms, columns, control units,
etc.)

If damage is found, please note this on the
shipping documents. Do not commission the lift
and contact your authorised dealer immediately.

Packaging materials (polythene, plastic sheets,
polystyrene, boxes, pins, screws, wood, etc.)
must be kept out of reach of children, since they
pose a potential hazard. Always dispose of the
environmentally unfriendly and non-
biodegradable materials at the appropriate
collection points. Please comply with any local
regulations and standards.