Rotary HydroLift MC62, Оригинальное руководство пользователя

Страница: 4 / 20

4
Power Unit Tank
Battery Locations
M20 Bolt
Adjust For
Ground Clearance
Fig. 1
WARNING
DO NOT use on asphalt. Lift must be
on concrete with a minimum strength of 20.6 MPa and
a minimum thickness of 114mm. Maximum allowed
floor slope is 10.5mm per meter side to side of vehicle
and 21.0mm per meter front to rear of vehicle. DO NOT
use on a suspended floor structure without specific
approval from structural engineer.
Ensure tires are properly inflated before lifting. DO
NOT exceed tire load rating when raising vehicle.
DO NOT raise/lower only one side of a vehicle.
Lift only on same axle. DO NOT stagger between
axles.
DO NOT drive over or pinch electrical cables.