Basic safety instructions
8
3
Basic safety instructions
3.1
General safety information
The machine was designed and manufactured under consideration of a hazard
analysis and on the basis of the relevant harmonised norms as well as additional
technical specifications. It corresponds to the latest technological standards valid
at the time of manufacture and the relevant safety regulations.
The machine is equipped with protective devices and was subject to a safety and
acceptance test. However, incorrect operation or improper use can pose a threat
to the lives and health of personnel. Damage to the machine itself, other equip-
ment or to the environment cannot be ruled out.
All work on the machine may only be performed by qualified and authorised per-
sons who have read the relevant sections in this operating manual and agree to
observe them.
For transport
•
Chap. 2 "Product description", page 6
•
Chap. 3 "Basic safety instructions", page 8
•
For setup
•
Chap. 2 "Product description", page 6
•
Chap. 3 "Basic safety instructions", page 8
•
•
Chap. 5 "Installation", page 19
For startup
•
Chap. 2 "Product description", page 6
•
Chap. 3 "Basic safety instructions", page 8
•
Chap. 6 "Starting up", page 22
•
For operation
•
Chap. 2 "Product description", page 6
•
Chap. 3 "Basic safety instructions", page 8
•
For shutting down
•
Chap. 2 "Product description", page 6
•
Chap. 3 "Basic safety instructions", page 8
•
•
Содержание ML40
