Rotary Lift ML40, Руководство по эксплуатации и техническому обслуживанию, Страница: 26 / 92

Operation
24
7 Operation
7.1 Basic safety instructions
WARNING
Scissors and castors
Crushing or amputation of limbs
• Do not reach or step into the danger zone ( Fig. 3-1, page 14 ).
WARNING
Improper placement of the load
Death or severe injuries from falling loads
• Observe the permissible load capacity of the machine (see load capacity
plate, type plate or
Chap. 2.3 "Technical data", page 7 ).
• Only place loads of the permissible type on the machine.
• The load may not protrude beyond the platform.
• Prevent unintended changes in the position of the load.
NOTICE
Incorrect operation
Severe damage to the machine
• Avoid repeated, sudden jolts when lifting and lowering the platform.
Before beginning each work shift
X
Inspect the machine for visible signs of damage.
If damage is detected:
X
Do not switch on the machine.
X
Attach or erect a notice sign prohibiting switching on the machine.
X
Notify your supervisor of the detected damage.
X
Only use the machine if all damage has been repaired.
X
Remove any foreign objects from the danger zone ( Fig. 3-1, page 14 ).
X
Remove materials and objects from the work area if they are not required.
X
Check and ensure that all safety devices are functioning flawlessly.
The preparations are completed.