Rotair D425T4F, Инструкция по эксплуатации и перечень запасных частей

Страница: 36 / 101

USER'S AND
MAINTENANCE
MANUAL
Date: 22/12/2016
Code MAN D425T4F ENG
Motor compressor D425T4F
Revision 00
Copyright © 2014, ROTAIR S.P.A. - All rights reserved This manual is intellectual property of ROTAIR S.P.A. Its
full or partial reproduction is forbidden under any form, on any support and by any means, without the written
authorization by ROTAIR S.P.A.
Page
36/57
10.3 During the work cycle
The machine must always operate with doors closed.
Check the fuel level.
During the work cycle it is necessary to verify that the intake openings are free of foreign bodies such as pieces
of paper, plastic, etc … as these materials can create obstructions to the ventilation system.
Figure 10-1 Exhaust pipe
WARNING:
in the vicinity of the exhaust pipe are very hot exhaust gases and harmful. Avoid the
stop in the vicinity of the exhaust pipe
10.4 Stop
1) Fully close the delivery taps.
2) Push the red stop button the motorized compressor will act to de-pressurize the machine until the gauge
pressure reaches a value of 3.5 bar before stopping.
3) Position On/Off switch to the left position;
10.5 After stopping the machine
1) If the machine has operated in dusty environments, it will be necessary to clean or replace the air filter and
check the status of cleaning the cooling radiator; where this is clogged, it will proceed as indicated in
paragraph maintenance.
2) Check that during the working phase there are no losses of fuel or lubricating oil inside the machine
3) Where possible place the machine away from the elements.