Rotair D425T4F, Инструкция по эксплуатации и перечень запасных частей

Страница: 21 / 101

USER'S AND
MAINTENANCE
MANUAL
Date: 22/12/2016
Code MAN D425T4F ENG
Motor compressor D425T4F
Revision 00
Copyright © 2014, ROTAIR S.P.A. - All rights reserved This manual is intellectual property of ROTAIR S.P.A. Its
full or partial reproduction is forbidden under any form, on any support and by any means, without the written
authorization by ROTAIR S.P.A.
Page
21/57
6.3 Safety provisions relevant to towing (for road-certified compressors only)
This paragraph concerns the machinery enabled to road circulation and therefore provided with regular
certification.
For the appropriate towing of the motor compressor, comply
with the following prescriptions:
1) Make sure that the large towing eyebolt or the
sphere connection is compatible with the towing
device located on the towing vehicle. Make sure
that the vehicle is enabled to tow a weight equal to
or greater than the one of the motor compressor you
intend to tow.
2) Check the pressure of the tires.
3) Adjust the height of the eyebolt so that it
corresponds to the one of the towing vehicle hook;
this can be obtained by acting on the articulate
joints of the steer, until the towing bar that supports
the eyebolt is as horizontal as possible.
4) Solidly lock the articulations by means of the
appropriate levers, make sure that there is no
clearance between the joint teeth.
5) Fit the safety plugs.
6) Hook the trailer to the vehicle, connecting also the
safety cable.
7) Release the park brake.
8) Lock the foot, or the support wheel, in the highest
possible position, making sure that the wheel
cannot rotate on itself, and remove the wheel if
required.
9) Connect the lighting system by introducing the motor compressor plug into the purposely-allocated power
outlet located on the vehicle and make sure that all the lights (position, turn, stop, number plate) are
operational.
10) If the machinery is provided with inertial brake, the latter disengages automatically when maneuvering at
reverse speed.
11) Periodically check the brakes and - if required - maintain them.
For the maintenance of the towing steer, of the axle and for the adjustment of the brakes, refer to the
Manufacturer's manual enclosed to this documentation.
WARNING:
To know the maximum speed for towing on the road, refer to the standards in force in the
country where the towing is performed. On site or in a towing area, do not exceed the towing speed of
10 km/h ( 6 Mph ).
Figure 6.3-1 Instructions for safe towing