Station 6 Preamplifier and Monitor Controller
17
Back panel
Mains input
The mains power inlet is a IEC 60320 receptacle for use
with a standard IEC 60320 C14 connector.
The acceptable voltage is 190 - 264 Volt AC, 50-60 Hz.
OBS: Always use the unit with safety earth.
Headphone output
The headphone amplifier output is sent to the 1/4" Jack
connector at the back panel and the 1/4" Jack connector
at the front panel.
The output signals at the two headphone Jacks, front
and back, are identical.
Talk Back input
The talk back microphone input can be found at the
3.5 mm stereo mini-jack at the back panel. The input is
balanced, and the input impedance is 1.2 kohm.
The input gain can be adjusted from +26 dB to +70 dB
by the trimmer potentiometer.
The TB mic input is mainly intended for dynamic
microphones, but a +5 V phantom voltage for electret or
lavaliere condenser microphones can be applied by
setting DIP switch 1.
