switch manual light-emitting
In Auto flash mode, lightly touch Auto flash button, the device will be
switched to manual flash mode.
8.
Keep the light outlet close to the area where you need to remove the
hair,
and try to place the device at a 90° angle on the skin
①When the device is in manual mode, w
ait for the indicator lights up,
press and release the flash button to emit the flashing light, the
treatment is finished for the area covered by the light outlet. Move
the light outlet to next area that need to be depilated, repeat the
steps above. It is recommended to flash each part 2-3 times, but no
more than 3 times.
②When the device is in the Auto flash mode, no need
to press the
flash button, the light will flash automatically, the treatment is finished
for the area covered by the light outlet. Move the light outlet to next
area to be depilated, repeat the steps above, it is recommended to
flash each part 2-3 times, but no more than 3 times.
40
