Place and fix M (tail
b o x p a r t s ) o n t h e
corresponding position
as shown in figure. Use
2 P(self-attack screws)
to fix it.
Step 4: Install tail box
parts
Step 5: Install Steering Wheel
P
M
1. First use screwdriver to wring the screw out of A (steering wheel) by
counterclockwise.
2. Press A (steering wheel) into [1], then use the screw to fix it.
A
A
[1]
Step 7-1: Install back of the chair
Place H (back of the chair) on the corresponding position as shown in
figure. Note: the 3 [1] need to be inserted into the 3 [2] on the car body as
shown in figure.
[1]
[2]
H
1.All batteries should be inserted in the correct polarity.
2.Non-rechargeable battery cannot be recharged
3.Take out and properly deal with the dead battery. To avoid injury, please
keep kids away from the battery.
4.The direct contact between the positive and negative terminals may result
in fire or explosion. Avoid direct connect between the terminals.
5.Do not mix old and new batteries. DO not mix alkaline, standard(carbon-
zinc),or rechargeable(nickel-cadmium) batteries.
6.Only an adult who has read and understood the safety warnings can
recharge the battery.
+
-
+
-
Firstly use a screwdriver to
unscrew the steering wheel
cover in counterclockwise,
then install 2 AA batteries
as shown, finally cover the
cover and tighten the
screws in clockwise.
Step 6: Install
steering wheel battery
+
-
+
-
WARNING!
