19
2
Q
(
M8 spanner
)
1
R(Charger)
Q
Step 1: Install the front axle
1. Use Q (M8 spanner) to loose the [2] nut from the [1] steering shaft in
counterclockwise direction, and also take down the [3] gasket.
2. Use Q (M8 spanner) to loose the [4] nut from the G(front axle) in
counterclockwise direction.
[1]
[1]
[2]
[2] [3]
[3]
[4]
G
3. Install the S(spring) at Z (square pipe), then insert the G(front axle)
through the S(spring) and square pipe, finally install the [4] nut in
clockwise direction (in the meantime, insert the [5] of front axle should
through the [1] steering shaft, then install the [3] gasket and [2] nut to fix
them in clockwise direction).
[1]
[1]
[3]
[3]
[2]
[2]
G
G
S
S
[4]
[4]
Z
Z
[5]
Q
20
2
S
(
Spring
)
6
P (self-tapping screw)
15
16
1
O
(motor L)
1
N (
motor R
)
17
18
4. Use Q (M8 spanner) to loosen the [7] nut from the front axle, and take
down one piece of gasket from the front axle ( keep the other one piece
of gasket on front axle ), as show in figure.
[6]
[7]
Q
L
R
T(plum blossom connecter)
21
2
Installation Steps
