background image

Headlight/Horn switch

Located on the left handle bar the

green

horn button can be pressed to honk the horn. The

red

headlight switch is located directly beneath it and can be used to turn the headlights on

and off.

Pre-Ride Checklist:

Brakes

- Check the brakes for proper function. When you squeeze the lever, the brake

should provide positive braking action.

Tires

– Check tires periodically. Inspect tires for excess wear and replace as needed.

(Please note riding on abrasive surfaces such as concrete or asphalt will increase tire
wear.) Regularly check the tire pressure and inflate as needed. Recommended tire
pressure is: 7 PSI. (Maximum: 20 PSI)

Frame and Handlebars

- Check for loose, cracked or broken connections. Although

broken frames are rare, it is possible for an aggressive rider to run into a curb or object
and wreck, bend or break the frame.

Hardware

- Check and secure all fasteners (nuts, bolts) before every ride. If the unit is

damaged, do not ride it.

Rider

- Always wear proper protective gear, such as an approved safety helmet. Elbow

pads, knee pads, pants and long sleeves are recommended. Always wear closed toe shoes
and keep shoelaces tied and out of the way of the wheels, motor and drive system.

NEVER RIDE BAREFOOT OR IN SANDALS.

Always check and obey any local laws or regulations.

11

Содержание E-QUAD S

















Отзывы: