Rosslare Mifare AS-B01 Скачать руководство пользователя страница 30

Страница: 30 / 50

Additional Programmer Utilities

CP-R25 Hardware and AS-B01 Software Manual

Additional Programmer Utilities

The AS-B01 software includes additional utilities that allow you to use the

programmer in the best and easiest possible way.
The card utilities are identical for both the Sector Read and CP-R25 tabs. The

CP-R25 tab has additional utilities designed specifically for the fingerprint

swipe application.

6.1

Card Utilities

The card utilities vary depending on the selection of either

Sector

Card

Serial Number (CSN)

Operation Mode

When

Card Serial Number (CSN)

is selected, there are two card utility

options available.
When

Sector

is selected, the same two card utilities are available, plus six

additional utilities specific to the Sector type card.

6.1.1

Reading a Configuration Card

This function is used to confirm the card configuration when performing other

functions in order to save time and enhance accuracy.

To read the Configuration cards:

Select either the

Sector Reader

CP-R25

tab.

Select the applicable

Operation Mode

, either

Sector

Card Serial

Number (CSN)

Operations

, select

Card utilities

In the

Operation Type

field, select

Read Configuration Card

from the

dropdown menu.

Figure 12: Read Configuration Card

Place the Mifare

Configuration Card on the CP-R25 Desktop Programmer

antenna area.

Click

Start

to begin reading the Configuration Card.

The configuration options are displayed on the screen.

Содержание Mifare AS-B01



















































Результаты поиска

Содержание Mifare AS-B01

Отзывы:

Rosslare Mifare AS-B01, Руководство по аппаратному и программному обеспечению, Страница: 30 / 50

Результаты поиска

Содержание Mifare AS-B01

Отзывы: