Controller Operation
58
AYC-Qx4 Family Installation and Programming Manual
If the assignment code is valid, the left LED stops flashing.
The controller is now waiting for another slot number.
5.
Do one of the following:
Press
#
to move to the next available user slot number.
Enter another 3-digit user slot number.
If you do not wish to continue enrolling codes, press
#
twice and
the controller returns to Normal mode.
5.9.16
Relay Code Assignment using Search Method
To assign relay code using the Search method:
1.
Enter Programming mode.
2.
Press
9
to enter Menu 9.
The left LED turns green and the right LED
turns orange.
3.
Enter
000
for user slot access.
The right LED flashes orange.
4.
Do one of the following:
Enter the PIN code of the Primary code
belonging to the user you want to delete.
Present the user card of the Primary code belonging to the
user you want to delete.
The left LED flashes green.
Green
Orange
Green
Orange
Green Orange
Green
