Reader Functionality
36
AYC-E/Q60 Family Instruction Manual
3.
Enter your 4-digit
Programming code.
If the Programming code is valid, all memory is erased, you hear
three beeps and the controller returns to Normal mode.
If the Programming code is invalid, you hear a long beep and the
controller returns to Normal mode without erasing the memory of
the controller.
5.2.12
Replacing a Lost Programming Code
In the event that the Programming code is forgotten, the AYC-E/Q60
may be reprogrammed in the field using the following instructions:
To replace a lost Programming code:
1.
Remove power from the reader.
2.
Activate the tamper by removing the reader from the wall or
removing the reader's case.
3.
Apply power to the reader.
4.
You now have 10 seconds to enter Programming Mode using the
factory default Programming code
1234
.