Testing the Reader
AY-R12 Installation Manual
13
6.
Testing the Reader
Once the reader has been wired to a power supply and the controller,
it should be tested.
To test the reader:
1.
Power up the reader. The beeper activates 3 times after which the
LED lights up green (according to Set 0, Set 1, Set 2, and Set 3
setup). This indicates that the reader is working properly.
The default is that the reader switches colors circularly. The color
can be set according to the input wires.
2.
Present the appropriate type of proximity card to the reader. The
LED turns green (if set to default) and a short beep is emitted,
indicating that the card was read properly by to proximity reader.
