Rosslare AC Series Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 38

Rosslare AC Series Скачать руководство пользователя страница 24

Programming

24

AC-x32 Series Installation and Programming Manual

5.1

Entering Programming Mode

The controller must be in Normal mode to enter the

Programming mode.
The factory default Programming code is 1234.
If a Programming code is not entered within five seconds, the
unit returns to Normal mode.

To enter Programming mode:

1.

Press

#

for two seconds.

The Mode LED turns off and the Door

LED turns red.

2.

Enter your 4-digit Programming code.

If the Programming code is valid, the
Door LED turns green and the unit

enters Programming mode.

5.2

Exiting Programming Mode

Wrong entries may reset the controller back to Normal mode.
While in Programming mode, if no key is pressed for one

minute, the unit exits Programming mode and returns to Normal
mode.
In certain Programming modes, a quick press on

#

may also

return the system to Normal mode.

To exit Programming mode:

1.

Press

#

for two seconds.

Three beeps are emitted.
The Door LED turns off.
The Mode LED turns green, indicating that
the unit has returned to Normal Mode.

Mode

Door

Red

Mode

Door

Green

Mode

Door

Green

«
...
22
23
24
25
26
...
»

Содержание AC Series







































Отзывы:

Нет отзывов