Rosslare AC Series Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 38

Rosslare AC Series Скачать руководство пользователя страница 20

Operation

20

AC-x32 Series Installation and Programming Manual

4.3.3

Changing from Normal to Bypass Mode

By default, there is no Normal/Bypass code. The Normal/Bypass code
must first be programmed to use this function (see Section

create/modify the Normal/Bypass Code).
To change from Normal to Bypass mode:

1.

Enter the 4-digit Normal/Bypass Code.

The Mode LED flashes orange.

2.

Press

#

to confirm the mode change.

The Mode LED turns orange.

4.3.4

Changing from Bypass Mode to Normal Mode

By default, there is no Normal/Bypass code. The Normal/Bypass code
must first be programmed to use this function (see Section

create/modify the Normal/Bypass Code).
To change from Bypass to Normal mode:

1.

Enter the 4-digit Normal/Bypass code.

The Mode LED flashes green.

2.

Press

#

to confirm the mode change.

The Mode LED turns orange.

4.4

REX Button

The REX button is used to open the door without the use of a PIN
code, and must be located inside the premises to be secured. It is

usually located in a convenient location, such as inside the door or at

a receptionist's desk. The function of the REX button depends on
whether the Lock Strike Relay is programmed for Fail Safe Operation

Mode

Door

Orange

Mode

Door

Orange

Mode

Door

Green

Mode

Door

Green

«
...
18
19
20
21
22
...
»

Содержание AC Series







































Отзывы:

Нет отзывов