3.7 Commissioning
DANGER:
Before starting unit’s connection, be sure that line tension corresponds to data on unit’s plate.
Proceed with following operations:
Fill the tank through the inlet tap and check that there is no water loss from gaskets or
fittings
Do not exceed the maximum available pressure indicated in the section “general technical
data”
Check all safety devices of hydraulic circuit
Check the plug connected to supply socket and that display lights up.
When plug is inserted, display shows tank’s temperature: press the button
to switch AIR
COMBO on.
Air Combo - installation, use and maintenance manual
AIRCOMBO_TEC_EN_4.07
Page 19 of 28
Rossato Group Srl
