Moreover the place of installation must:
have a suitable electric energy supply line;
have a suitable water supply line;
be predisposed with suitable water discharge connections in case of damages on the tank,
intervention of safety valve or break of pipes/connections;
have possible containing systems in case of big water losses;
have sufficient lightening;
During operation the unit lows room temperature down: if necessary, a ventilation system
should be made so that temperature won’t be too low;
The unit is not particularly noisy, however it is recommended not to place it close to bedrooms
or living rooms.
3.3 Unpacking
NOTE:
Disposal of packaging is care of receiver who will make it in conformity with local laws of the
country where the heat pump is installed.
DANGER:
During unpacking, people incharged must wear proper equipment for individual safety, such as
safety gloves and glasses.
Demolition of packaging should be made as follows:
cutting or tacking the external packaging off;
removing the unit from the pallet.
NOTE:
After taking the packaging off please check that there is no tampering. If there is, please contact
Assistance Service.
3.4 Installation and commissioning
DANGER:
The unit is not planned to operate in explosive atmosphere. It is thus forbidden to install or use it in
such environment
DANGER:
Installation and commissioning of the unit must be made only by authorized and qualified
technicians.
The unit has to be placed on a stabile and horizontal surface that can carry enough load (for
unit’s weight see the table of technical data).
Air Combo - installation, use and maintenance manual
AIRCOMBO_TEC_EN_4.07
Page 15 of 28
Rossato Group Srl
