Printed in Canada.
5
To re-install the door to the chassis
1.
Align the door to the front of the router, ensuring that the door is oriented upright, the corner with the Ultrix logo
is in your left hand, and the corner with the Ross logo is in your right hand. Refer to
Figure 6
Front Panel — Aligning the Door to the Chassis
2.
Align the left-side of the door against the chassis.
3.
Align the right-side of the door, gently rotating the door into position.
4.
Verify that the door is fully seated in place with the magnets securing it to the chassis.
Caution
— Re-installing the door incorrectly or misaligned can damage the door or internal
components.
ESD Susceptibility
— Static discharge can cause serious damage to sensitive semi-conductor
devices. Avoid handling circuit boards in high static environments such as carpeted areas and when
synthetic fiber clothing is worn. Always exercise proper grounding precautions when working on circuit
boards and related equipment.
IP: ##
#.###
.##.###
IP: ##
#.#
##.
##.###
1
2
3
4
