Printed in Canada.
3
Figure 4
Removing the Cooling Fan Module from the Chassis
4.
Pull the module free from the chassis and set it on a static-free surface.
Installing the Micro SD Card into the New Cooling Fan Module
The Micro SD card provides system storage and a default software build. The Micro SD card slot is located inside the
Cooling Fan Module and between the first fan and the fan PCB in the module. You must remove the Micro SD card
from the failed Cooling Fan Module and install it in the new Cooling Fan Module.
To eject the Micro SD card from the failed Cooling Fan Module
1.
Remove the Cooling Fan Module as outlined in the section “
To remove the Cooling Fan Module from the
2.
Locate the Micro SD card slot inside the failed Cooling Fan Module. Refer to
Notice
— Compare the failed Cooling Fan Module with the new module shipped to you for
replacement. Ensure that the new module includes the same number of fans as the failed module.
Contact Ross Video Technical Support if the modules do not match.
Notice
— You must use the Micro SD card from the failed Cooling Fan Module. Use of an alternate
Micro SD card will result in loss of vital system information. Swapping out the Micro SD card with a
different Micro SD card returns the router to its factory default settings.
Notice
— Perform this procedure only if instructed by Ross Video Technical Support. Customer
supplied Micro SD cards may prevent and/or corrupt normal operation.
