Printed in Canada.
4
Figure 5
Location of Micro SD Card Slot — Between the Fan and the Fan Board
3.
Gently press in on the Micro SD card so that it pops out from the slot.
4.
Make a note of the orientation of the card in its slot. This will help with installing the Micro SD card into the new
Cooling Fan Module.
5.
Gently pull the Micro SD card out.
To install the Micro SD card into the new Cooling Fan Module
1.
Locate the Micro SD card slot inside the new Cooling Fan Module. Refer to
.
2.
Orient the Micro SD card so that the printed side faces the fan and the print is upside down. Refer to
Figure 6
.
3.
Carefully insert the Micro SD card into the slot.
The Micro SD card makes a faint clicking sound when it is fully inserted.
Installing a New Cooling Fan Module in the 2RU Chassis
Once you have installed the Micro SD card into the new Cooling Fan Module, you can install the new module into the
Ultrix chassis and replace the door on the front panel.
To install a new Cooling Fan Module into the chassis
1.
Align the new Cooling Fan Module in the slot inside the chassis.
2.
Gently push the Cooling Fan Module into the slot until the module is fully seated. You will feel the back
connector of the module engaged with its connector inside the chassis.
3.
Use the screw from step 2 in the procedure “
To remove the Cooling Fan Module from the chassis
” to affix the
Cooling Fan Module to the frame.
Caution
— The Cooling Fan Module includes a connector that must be fully seated. Reinstalling the
Cooling Fan Module retention screw is required to ensure proper contact.
MicroSD Card
