Ross Ultrix 2101DR-008-11, Руководство пользователя, Страница: 51 / 56

Ultrix SFP Modules Guide (v11.0) SFP-MADI-850MM • 51
SFP-MADI-850MM
The SFP-MADI-850MM is an optical transceiver module designed to transmit and receive electrical and optical
serial digital signals as defined in SMPTE 297-2006 and AES10.
A highly-reliable 850nm wavelength Vertical Cavity Surface Emitting Laser (VCSEL) is used in the transmitter.
The transceivers satisfy Class I Laser Safety requirements in accordance with the U.S. FDA/CDRH and
international IEC-60825 standards.
Features
• SMPTE 297-2006 compliant
• Suitable for AES10 transmission and receiving
• Best-in-class optical receiver sensitivity: -22dBm (over all supported video rates with pathological data)
• Robust error free transmission of signals from 50Mbps to 3Gbps with up to 500m (50µm multi-mode fiber)
• Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
• Hot-pluggable
• Operating temperature range from -5°C to +70°C
Simplified Block Diagram
Figure 13.1 High Level Block Diagram
Technical Specifications
Note that specifications are subject to change without notice.
Absolute Maximum Ratings
Exceeding any of these ratings may permanently damage the module. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
Table 13.1 Absolute Maximum Ratings
Parameter Min. Max. Notes
Supply Voltage -0.5V 4V
Case Operating Temperature -5°C 70°C Measured on the top side of
the module at the front center
vent hole of the cage
Storage Temperature -40°C +85°C
Relative Humidity 5% 95% Non-condensing
OPTICAL
MODULE
FIBER IN
(780-880nm)
FIBER OUT
(850nm)
AUX
IN
AUX
OUT