Ross Ultrix 2101DR-008-11, Руководство пользователя, Страница: 15 / 56

Ultrix SFP Modules Guide (v11.0) Configuring the SFP Options • 15
Configuring the SFP Options
The Ultrix router does not automatically detect when an AUX port is populated with an SFP module. You must
manually enable the port and assign an SFP module type using the options in the Frame Configuration interface in
DashBoard.
Before You Begin
Ensure the following steps are completed before configuring the options for an SFP module:
• Ensure the SFP module is physically installed into the SFP port of the Ultrix rear panel. Refer to the section
“ Installation Overview ” on page 13.
• Ensure that the Ultrix router is running software version 4.0 or higher. Refer to the Ultrix Installation Guide for
information on verifying the software version and upgrade instructions.
Configuring an SFP Module
This section is applicable to all SFP module types that the Ultrix supports.
To configure an SFP module installed in an AUX port
1. Locate the Ultrix in the Tree View of DashBoard.
2. Expand the Ultrix node to display a list of sub-nodes in the Tree View.
Each sub-node is an Ultrix interface.
3. Expand the Devices node.
4. Expand the Contr Matrices node.
5. Double-click the node for your Ultrix router.
The Device Configuration interface opens with the
Frame Configuration
interface selected.
6. Click
SFP Configuration
.
The SFP Configuration table displays.
7. From the Slot list, select the blade that the AUX port is located on.
8. From the For list, select the row for the AUX port you want to configure.
9. Use the SFP menu to select an option matching the type of SFP installed.
10. If MADI if selected as the SFP Type, use the MADI I/O Size menu to specify the number of MADI channels
the AUX port will support.
11. Click
Apply
to save your changes.