Ross Ultrix 2101DR-008-11, Руководство пользователя, Страница: 21 / 56

Ultrix SFP Modules Guide (v11.0) SFP-HDM-OUT-12G • 21
SFP-HDM-OUT-12G
The SFP-HDM-OUT-12G is an HD/3G/6G/12G-SDI to HDMI 2.0 converter, able to transmit one SDI signal via an
HDMI Type D connector.
Features
• SMPTE 2082, SMPTE 2081, SMPTE 424, SMPTE 292, and HDMI 2.0 compliant
• Supports video pathological patterns for HD-SDI and 3G-SDI
• HDMI type D connector
• Hot-pluggable
• Operating temperature range: -20°C to 85°C
Simplified Block Diagram
Figure 5.1 SFP-HDM-OUT-12G — High Level Block Diagram
Module Installation
The module is simply inserted, small end first, under manual pressure. Controlled hot plugging is ensured by
design. The module housing makes initial contact with the router board EMI shield, mitigating potential damage
due to Electrostatic Discharge (ESD).
Technical Specifications
Note that specifications are subject to change without notice.
Absolute Maximum Ratings
Exceeding any of these ratings may permanently damage the module. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
Table 5.1 Absolute Maximum Ratings
Parameter Min. Max. Notes
Supply Voltage 0V 3.6V
Operating Case Temperature -20°C +85°C Measured on the top side of
the module in the center
Storage Temperature -40°C +85°C
Operating Relative Humidity 5% 95% Non-condensing
ESD Rating 1kV HBM
HDMI OUT
AUX
OUT
HDMI
TRANSMITTER
RECLOCKER,
10BIT
DESERIALIZER