Ross Ultricool, Руководство пользователя

Страница: 32 / 36

32 • DashBoard Interface Overview Ultricool User Guide (v1.0)
Setup Tab
Table 10.3 summarizes the options in the Setup tab.
PSU # State Present -OK The specified power supply connection is present
and working correctly
Missing The specified power supply connection is missing;
no power supply is detected on this port
Missing - Alarm masked The Redundant Power Alarm is disabled
Voltage Error The specified power supply is out of voltage range
Fan # (rpm) # Reports the speed of the specified fans
(~4000-18000rpm)
Temp (°C) # Reports the current interior temperature of the
Ultricool chassis
Table 10.3 Setup Tab
Item Parameters Description
Fan Settings
Mode Auto Enables communications with Ultrix (if set) or
RossTalk mode
Min Sets the fan speed to the minimum RPM
Low Sets the fan speed to approximately 20% of the
maximum speed
Medium Sets the fan speed to approximately 50% of the
maximum speed
High Sets the fan speed to approximately 100% of the
maximum speed
Ultrix Connection
Device Control Manual IP Enables you to manually specify the IP Address of
the Ultrix router that will control the Ultricool. It is
recommended to use this setting if your network
policy blocks the Walkabout multi-cast UDP port.
RossTalk client Enables the Ultricool to get and send RossTalk
commands from an external device
Ultrix # The specific Ultrix router will control the Ultricool
Refresh
Device List Refresh Ultricool polls the network for Ultrix routers.
Updates the list of detected routers, to a maximum
of six, that are available for communication.
Ultrix IP
Address ##.##.##.### Specifies the IP Address of the Ultrix router that is
communicating with the Ultricool. The Device
Control is set to Manual IP.
Table 10.2 Hardware Tab
Item Parameters Description