Ross Ultricool, Руководство пользователя

Страница: 24 / 36

24 • Connecting to an Ultrix Ultricool User Guide (v1.0)
To establish a connection using Manual IP mode
1. Display the Setup tab for the Ultricool as outlined in the procedure “ Accessing the Ultricool Interfaces in
DashBoard ” on page 21.
2. Set the Fan Speed mode to Auto .
3. Click
Refresh
to update the list of available control devices available in your routing system.
4. Use the Device Control menu to select Manual IP .
5. Specify the Ultrix router that will control the Ultricool as follows:
a. Use the Ultrix IP Address to specify the IP Address of the Ultrix router.
b. Press
Enter
to apply the new value.
6. Click
Apply
to establish the connection.
Verifying the Connection
You can verify the connection between the Ultricool and the Ultrix router in two ways:
• via the LED on the front panel (refer to Table 8.1 )
• via the Hardware tab in DashBoard
To use DashBoard to verify the connection between Ultricool and Ultrix
1. Select the Hardware tab in the Ultricool window of DashBoard.
2. Locate the Status field on the tab and verify that:
• the indicator is lit blue
• the field reports as message of
Connected to Ultrix