background image

UDA-8705A User Manual (Iss. 02)

Service Information • 6–3

Warranty and Repair Policy

The UDA-8705A is warranted to be free of any defect with respect to performance, quality, 
reliability, and workmanship for a period of FIVE (5) years from the date of shipment from our 
factory. In the event that your UDA-8705A proves to be defective in any way during this 
warranty period, Ross Video Limited reserves the right to repair or replace this piece of 
equipment with a unit of equal or superior performance characteristics.

Should you find that this UDA-8705A has failed after your warranty period has expired, we will 
repair your defective product should suitable replacement components be available. You, the 
owner, will bear any labor and/or part costs incurred in the repair or refurbishment of said 
equipment beyond the FIVE (5) year warranty period.

In no event shall Ross Video Limited be liable for direct, indirect, special, incidental, or 
consequential damages (including loss of profits) incurred by the use of this product. Implied 
warranties are expressly limited to the duration of this warranty.

This UDA-8705A User Manual provides all pertinent information for the safe installation and 
operation of your openGear Product. Ross Video policy dictates that all repairs to the 
UDA-8705A are to be conducted only by an authorized Ross Video Limited factory 
representative. Therefore, any unauthorized attempt to repair this product, by anyone other than 
an authorized Ross Video Limited factory representative, will automatically void the warranty. 
Please contact Ross Video Technical Support for more information.

In Case of Problems

Should any problem arise with your UDA-8705A, please contact the Ross Video Technical 
Support Department. (Contact information is supplied at the end of this publication.)

A Return Material Authorization number (RMA) will be issued to you, as well as specific 
shipping instructions, should you wish our factory to repair your UDA-8705A. If required, a 
temporary replacement frame will be made available at a nominal charge. Any shipping costs 
incurred will be the responsibility of you, the customer. All products shipped to you from Ross 
Video Limited will be shipped collect. 

The Ross Video Technical Support Department will continue to provide advice on any product 
manufactured by Ross Video Limited, beyond the warranty period without charge, for the life of 
the equipment.

Содержание UDA-8705A

































Отзывы: