Ross SRA-8901 Series, Руководство пользователя

Страница: 19 / 40

SRA-8901 Series User Manual (Iss. 02) Installation • 2–5
Cabling
This section provides Belden 1694A cabling details based on the card model.
SRA-8901-4 Cabling
The 8322AR-311 Split Rear Module is required for the SRA-8901-4. Each rear module occupies
two slots and accommodates two cards. This rear module provides an SDI input, and four SDI
outputs per card. (
Figure 2.4 )
Figure 2.4 Cable Connections for the SRA-8901-4
SRA-8901-10 Cabling
The 8322AR-312 Full Rear Module is required for the SRA-8901-10. Each rear module occupies
two slots, and accommodates one card. This rear module provides one SDI input, and ten SDI
outputs. (
Figure 2.5 )
Figure 2.5 Cable Connections for the SRA-8901-10
Note
— It is recommended to terminate unused outputs. You can also mute an unused output
via the Mute Outputs options available in the Setup tab of DashBoard.
SDI OUT 1
SDI OUT 2
SDI OUT 3
SDI OUT 4
SDI IN SDI IN
SDI OUT 1
SDI OUT 2
SDI OUT 3
SDI OUT 4
BF
Card 1 Card 2
SDI OUT 1
SDI OUT 2
SDI OUT 3
SDI OUT 4
SDI IN SDI OUT 5
SDI OUT 6
SDI OUT 7
SDI OUT 8
SDI OUT 9
SDI OUT 10
BG