Ross SEA-8203A, Руководство пользователя

Страница: 23 / 36

SEA-8203A User Manual (Iss. 01) Control and Monitoring
•
4-3
Configuration Menus
The following table summarizes the Configuration Menu options available in DashBoard.
Table 2. Configuration Menus
Menu Item Parameters Description
HD*
Select this option if
1.485Gbps or if a mix of
SD and HD signals are
passed through the card
Signal Rate
SD
Select this option when
passing rates of 143, 177,
270, 360, or 540Mbps
Checkbox is selected* The input is equalized
Enable Equalizer
Checkbox is unselected The equalizer is bypassed
Checkbox is selected
The output is muted on
loss of input
Mute on Loss of Input
Checkbox is
unselected* The output is not muted
on loss of input
Checkbox is selected*
DashBoard reports the
loss of input
Notify on Loss of
Input
Checkbox is unselected
DashBoard does not
report the loss of input
Unlocked*
All configurable menu
options are editable
Locked
All configurable menu
options, except this one,
are locked and are read-
only
Edit Permission
Local Only
JP1 is set to LOCAL
and all configuration
parameters, including this
one, are locked and read-
only
Setup
Factory Defaults Reset Defaults all the settings
* This is the default setting.
SNMP Monitoring and Control
The MFC-8310-N Network Controller card in the DFR-8300 frames provide optional support for
remote monitoring and control of your frame and SEA-8203A using SNMP (Simple Network
Management Protocol), which is compatible with many third-party monitoring and control tools.
Refer to your SEA-8203A MIB (Management Information Base) file for a breakdown of SNMP
controls on this card.
Refer to the manual for your DFR-8300 series frame for additional information on SNMP Monitoring
and Control.