Ross Opengear UDC-8625A Series Скачать руководство пользователя страница 68

Страница: 68 / 174

4–10 • AFD

UDC-8625A Series User Manual (Iss. 11)

AFD and ARC Status

The following fields and tabs provide status information on the ARC and/or AFD:

•

Video Processing Input —

This field in the

Signal

tab indicates the status of the input.

Information such as the format, aspect ratio, coded frame, and the detected AFD code
(four digit AFD code and whether AFD is enabled) is also displayed. Refer to

Table 9.1

on page 9-2 for details.

•

Video Processing Output —

This field in the

Signal

tab indicates the status of the output

AFD, whether it is enabled, the aspect ratio, and the four digit AFD code if the AFD is
enabled. Refer to

Table 9.1

on page 9-2 for details.

• The

ARC

tab includes the

AFDs Used in the ARC

fields. These fields display the Input

AFD and Output AFD codes used in the ARC. Refer to

Table 9.13

on page 9-14 for

details.

• The

Input Status

tab includes the

AFD

field that indicates whether the AFD Code is

present in a specified input. Refer to

Table 9.24

on page 9-32 for details.

Содержание Opengear UDC-8625A Series















































































































































































Результаты поиска

Содержание Opengear UDC-8625A Series

Отзывы:

Ross Opengear UDC-8625A Series, Руководство пользователя, Страница: 68 / 174

Результаты поиска

Содержание Opengear UDC-8625A Series

Отзывы: