Ross Opengear UDC-8625A Series, Руководство пользователя, Страница: 55 / 174

UDC-8625A Series User Manual (Iss. 11) Configuration • 3–15
• The Reboot Confirm dialog displays, indicating the number of cards that will
re-boot. Click
Yes
to continue the upgrade process. Note that clicking
Cancel
or
No
returns you to the Uploading to Selected Devices dialog without rebooting the
card(s).
• The card(s) are temporarily taken off-line during the re-boot process. The process is
complete once the status indicators for the Card State and Connection fields return
to their previous status.
Troubleshooting
If you encounter problems when upgrading your card software, verify the following:
• Your network settings on the card are valid. Refer to Table 9.8 for a list of available
settings.
• The ethernet cable is properly connected if you are uploading the file via a network
connection.
• The file you are attempting to load is a *.bin file that is for the card you are upgrading.
• If you are upgrading to version 1.3 or higher from an earlier version, DataSafe will only
recall settings for Input 1 on the Embedded Audio Selection and Embedded Audio
Processing tabs and apply default values to Input 2. This only occurs until the next reboot
of the card, when DataSafe is able to recall the saved settings for each specific Input.