Ross Opengear UDC-8625A Series, Руководство пользователя, Страница: 115 / 174

UDC-8625A Series User Manual (Iss. 11) Appendix A. DashBoard Menus • 9–11
Ethernet Tab
Table 9.8 summarizes the Ethernet options available in DashBoard.
Personality Tab
Table 9.9 summarizes the options available in the Personality tab.
Note
— The 8320AR-041 and 8322AR-065 rear modules do not include an Ethernet
port. You can configure the settings on the Ethernet tab, but the changes do not take
effect.
Table 9.8 Ethernet Menu Items
Menu Title Item Parameter Description
Ethernet
Method
Static User manually supplies the network settings
DHCP
Automates the assignment of the network
settings
IP Address ##.#.#.### The IP Address for the card
Subnet Mask ###.#.#.# The subnet mask for the card
Default Gateway ##.#.#.#
The gateway for communication outside of the
local area network (LAN)
Apply Changes
Applies and saves any changes made to the
Ethernet Settings
Cancel
Cancels any setting changes and resets the
Ethernet Settings to the previous values
Ethernet Status
OK Ethernet communications for the card are valid
Link Down
Ethernet communications for the card are
invalid. The ethernet cable may be
disconnected on the rear module or the
Ethernet network may be down.
No IP Address
The following conditions may be occurring:
• The
Method is set to
DHCP
and the DHCP
server is not available
• The ethernet cable is disconnected from the
card rear module
• A valid IP Address is no longer available.
The DHCP server may be down or is still
powering up after a loss of power.
##:##:##:##:##:## (read-only) The MAC Address for the card
Table 9.9 Personality Menu Items
Option Title Item Parameters Description
Transition
Behavior
Cut Button
Abort*
Select this option to return the transition to
the beginning when the
Cut
button is
pressed again while a transition is in
progress
Finish
Select this option to instantly finish the
transition when the
Cut
button is toggled