Ross NWE-TS, Руководство пользователя, Страница: 49 / 68

NWE-TS User Manual (Iss. 01) DashBoard Menus • 4–9
Configuration
Set
Applies the change made to the SID Code
Level menu
System Mode
Active ASI signals are routed through the card
Bypass
ASI signals on the input BNCs bypass the
card and are looped passively to the output
BNCs through the relays
System TSID # x ####
Specifies the transport stream identifier
for the incoming signal
Set
Applies the change made to the System
TSID field
Day ##
Specifies the current date for the System
Clock to start counting from
Month #
Year ####
Set Encoder Date
a
• Applies the changes made to the Day,
Month, and Year fields
• Updates the Encoder Date field in the
Status tab
Hour
b
#
Specifies the hour for the System Clock to
start counting from; assumes a
twenty-four hour clock
Minutes #
Specifies the minute for the System Clock
to start counting from
Seconds #
Specifies the second for the System Clock
to start counting from
Set Encoder Time
• Applies the changes made to the Hour,
Minutes, and Seconds fields
• Updates the Encoder Time field in the
Status tab
Cancel Changes
Returns the menu items on the
Configuration tab and SID Assignment
tab to their previously saved settings
Encoding Parameters For use by Nielsen only.
Password For use by Nielsen only.
Set Factory Defaults
Resets the settings in the Configuration
and SID Assignments tabs to their default
values
a. This field is read-only when Time Reference is set to NTP.
b. This field is read-only when Time Reference is set to NTP or LTC.
Table 4.6 Configuration Tab Items
Menu Title Item Parameters Description